Modern Ice distributes Clinebell Block Ice Makers for all your carving block and artisanal ice requirements.

Clinebell offers several models to choose from.  Modern can provide you all the supplies and accessories you need for these ice makers as well.

See below for more information.


To learn more, contact Modern Ice at 1-800-543-1581 or info@modernice.com 

Clinebell Logo
Clinebell B-56 Block Ice Maker

B-56 Block Ice Maker

This unit designed to be placed in an existing ice plant with a central refrigeration system

Unit Dimensions: 80.5″ W x 40.5″ D x 37″ H
Unit Weight: 750 lbs.
Voltage: Dependent on system
Construction material: Galvanized steel
Days to complete cycle: 12-14 Hours
Block produced per cycle: 56
Block dimensions: 4.5″ W x 8.75″ D x 10″ H
Block weight (per): 11 lbs.

Clinebell B-30 Block Ice Maker

B-30 Block Ice Maker

The B-30 is a “Plug and Play” version of the 11 lb Block Maker. It is ready to run the moment you pull it off the pallet.

Unit Dimensions: 65.5″ W x 37.5″ D x 41″ H
Unit Weight: 685 lbs.
Voltage: 220 volts
Construction material: Galvanized steel
Days to complete cycle: 12-14 hours
Block produced per cycle: 30
Block dimensions: 4.5″ W x 8.75″ D x 10″ H
Block weight (per): 11 lbs.

Clinebell S-60 Block Ice Maker

S-60 Block Ice Maker

This unit is designed to be placed in an existing ice plant with a central refrigeration system

Unit Weight: 750 lbs.
Voltage: Dependent on current system.
Construction material: Galvanized steel
Days to complete cycle: 12-14 hrs.
Block produced per cycle: 60
Block dimensions: 5.5″ W x 5.5″ D x 10″ H
Block weight (per): 10 lbs.

Clinebell S-35 Block Ice Maker

S-35 Block Ice Maker

This is a “Plug and Play” version of the 10 lb Block Maker. It is ready to run the moment you pull it off the pallet.

Voltage: 220 volts
Construction material: Galvanized steel
Days to complete cycle: 12-14 hrs.
Block produced per cycle: 35
Block dimensions: 5.5″ W x 5.5″ D x 10″ H
Block weight (per): 10 lbs.

Clinebell CB300X2E Block Ice Maker

CB300X2E Block Ice Maker

This machine will produce two of Clinebell’s signature 300-Pound Crystal Clear blocks in a three-day run cycle.  This is the Export model of the CB300 and runs on 208-230 V.

Construction Material: Galvanized steel
Voltage: 220 volts
Days to complete cycle: 3-4 days
Electrical draw per cycle: 40.8 kW/Day
Block produced per cycle: 2
Block Dimensions: 20″ by 40″ by 10″ thick
Block Weight (per): 300 lbs
Gallons of water per chamber: 40 Gal

Clinebell CB300X2D Block Ice Maker

CB300X2D Block Ice Maker

This machine will produce two of Clinebell’s signature 300-Pound Crystal Clear blocks in a three-day run cycle. This is the US Domestic model of the CB300 and runs on 110-120 V.

Construction Material: Galvanized steel
Voltage: 115 volts
Days to complete cycle: 3-4 days
Electrical draw per cycle: 36 kW per day
Block produced per cycle: 2
Block Dimensions: 20″ by 40″ by 10″ thick
Block Weight (per): 300 lbs
Gallons of water per chamber: 40 Gal

Clinebell CI-4 Block Ice Maker

CI-4 Block Ice Maker

This machine is designed for the Bar Ice Community.  Perfectly built for the backroom of any bar, this new spin on the classic clear block produces four 25 lb blocks every 24 hours and it fits through a standard man door!

Construction Material: Galvanized steel
Voltage: 115 volts or 208-230 volts
Time to complete cycle: 24 hours
Blocks produced per cycle: 4
Block Dimensions: 7″ by 5.5″ by 20″ thick
Block Weight (per): 25 lbs
Machine Dimensions: 26″ Deep x 50″ Wide x 38″ Tall

Clinebell Tilt Cart

Carving Block Tilt Cart

  • Designed to be used with the Clinebell Carving Block Hoist & power or manual ice shavers
  • Roll the Tilt Cart between the Hoist legs and slowly lower the block of ice down onto the cart
  • The block of ice is ready to be moved to your work area
  • To box the block of ice once it’s on the Tilt Cart, just lift approximately 40 lbs. from one end. While the Tilt Cart and block of ice are on one end, slide the box over the ice, lower the block and the Tilt Cart and then lift the other end of the Tilt Cart to close the box.
Clinebell SnoCap Model HST Ice Block Hoist

SnoCap Model HST Hoist

  • Designed specifically for use with Carving Block Machine, model CB300, the Tipper Cart and Trim Saw
  • This design is compact, easy to maneuver, and very reliable
  • The gear reduction chain hoist offers ease and reliability with minimal pull
  • Help with process and production problems is only a phone call away
Clinebell Ice Block Manual Ice Shaver

Manual Ice Shaver

  • Manually chips excess ice off the top of carving blocks.  Outside edges freeze up faster than the center
  • Creates a consistent size block for re-sale
  • Can be slid into cardboard box for easier and safer handling
  • Blades pre-set at cutting angle for optimal efficiency
  • Blade should be professionally sharpened as needed.  Replacement blades are available.
  • Designed for use in conjunction with the Clinebell Tilt Cart
Clinebell Ice Block Power Ice Shaver

Power Ice Shaver

  • Powerful rotating blades remove excess ice off the top of carving blocks.  Outside edges freeze up faster than the center
  • Creates a consistent size block for re-sale with minimal physical effort & time
  • Blades pre-set at cutting angle for optimal efficiency
  • Blade should be professionally sharpened as needed.  Replacement blades are available.
  • Designed for use in conjunction with the Clinebell Tilt Cart